Sony 49" TV LED Backlight Strip Replacement - 6pcs 15LED 950mm Aluminum (XBR-49X900F, XBR-49X950H, KD-49X900F) | Tech Parts

Quick Answer

This Tech Parts TV backlight strip set is designed for selected Sony 49-inch BRAVIA LED TVs and helps restore the display backlight when the original bars fail. It is a replacement part for repair use and fits the listed Sony models: XBR-49X900F, XBR-49X950H, KD-49X900F, KD-49XG9505, KD-49XF9005.

Key Features

• Fitment: Replacement backlight bars for selected Sony 49-inch BRAVIA models (XBR-49X900F, XBR-49X950H, KD-49X900F, KD-49XG9505, KD-49XF9005).
• Set contents: 6 strips per set, 950 mm per strip (15 LED per strip).
• Material: Aluminum enclosure (per manufacturer description).
• Installation aid: Double-sided tape is pre-applied to the strips (per manufacturer description).
• Quality check: Every strip is tested before shipment (per manufacturer description).

Product Description

This replacement LED backlight strip set is intended for repairing the backlight of selected Sony 49-inch BRAVIA TVs. Each set contains 6 strips per set; every strip is 950 mm per strip (15 LED per strip) and uses an aluminum enclosure. Manufactured in Mainland China.

The strips are supplied with double-sided tape pre-applied and are tested before shipment. Fitting is a repair procedure: the TV chassis must be opened and the failed original bars removed before connecting the replacements. Confirm the exact TV model and production year before ordering, since backlight bars differ between model families.

Product Specifications

Recommended Use Cases

• Replacing failed backlight bars during TV repair.
• Service-shop replacement stock for 49-inch Sony BRAVIA sets.
• DIY repair for the listed Sony models when the original part number is confirmed.

Installation and Use

1. Confirm the TV model and year against the compatibility list before ordering.
2. Power off and unplug the TV, then open the chassis following the service procedure for the model.
3. Remove the failed bar(s), disconnect the connector, and fit the replacement using the pre-applied double-sided tape; re-connect and close the chassis.

Note: Keep the TV powered off during the whole procedure and verify the connector and strip length match the original part.

Package Contents

• 6 x LED backlight strips (950 mm, 15 LED), double-sided tape pre-applied

Before You Buy

• Confirm the device model and model year (bars differ between model families).
• Confirm the strip length (950 mm) and LED count (15 LED) match the original bar.
• Confirm the required quantity: this listing is a 6 strips per set.
• Confirm installation is done by a qualified repair procedure.

Original Detail Images

Frequently Asked Questions

Q1: Which devices is this accessory compatible with?

It is designed for the Sony models listed in the source data: XBR-49X900F, XBR-49X950H, KD-49X900F, KD-49XG9505, KD-49XF9005. If your TV model is not listed, verify the original bar length and connector before ordering.

Q2: What is the installation method?

This is a replacement backlight bar installed inside the TV chassis. The strips have pre-applied double-sided tape, but fitting requires opening the TV and matching the original connection. Do not attempt it while the TV is powered on.

Q3: What interface or size does it support?

The strips are 950 mm per strip (15 LED per strip). The connection is a hardwired bar connection - no USB cable is included. Confirm the original bar size before ordering.

Q4: What should I confirm before ordering?

Confirm the TV model and year, the original strip length and LED count, and that the set quantity (6 strips per set) matches your repair requirement.